![]() * Remove i2c write command when reading cols on Ergodox EZ * Comment on mcp23018 address state during read_cols |
5 years ago | |
---|---|---|
.. | ||
keymaps | [Keymap] update to Danielo515 keymaps (#8004) | 5 years ago |
util |
…
|
|
190hotfix.sh |
…
|
|
config.h | Move Ergodox EZ RGB Light code to custom driver (#7309) | 6 years ago |
ergodox_ez.c |
…
|
|
ergodox_ez.h |
…
|
|
info.json |
…
|
|
led_i2c.c | Use White channel on RGBW LEDs (#7678) | 5 years ago |
matrix.c | [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) | 5 years ago |
post_config.h | Move Ergodox EZ RGB Light code to custom driver (#7309) | 6 years ago |
readme.md |
…
|
|
rules.mk | Trim firmware sizes from default rules.mk, part 1 (#8027) | 5 years ago |
readme.md
ErgoDox EZ
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli
.
To flash the firmware:
-
Build the firmware with
make <keyboardname>:<keymapname>
, for examplemake ergodox_ez:default
-
This will result in a hex file called
ergodox_ez_keymapname.hex
, e.g.ergodox_ez_default.hex
-
Start the teensy loader.
-
Load the .hex file into it.
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
-
Click the button in the Teensy app to download the firmware.
See also video demonstration using Teensy in auto mode.
To flash with ´teensy-loader-cli´:
-
Build the firmware with
make keymapname
, for examplemake default
-
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
Settings
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.