nathan
/
qmk-fw
1
0
Fork 0
Code Issues Releases Activity

Enhance the HotmailNotifier project so that the LEDs' individual brightness can be controlled individually via software PWM.

Browse Source
Dean Camera 16 years ago
parent 2cab8f0725
commit 3d6508c9b9
6 changed files with 125 additions and 26 deletions
Show Stats Download Patch File Download Diff File

2
LUFA.pnproj
View File

File diff suppressed because one or more lines are too long

37
LUFA/ManPages/AlternativeStacks.txt
Unescape Escape View File

@ -0,0 +1,37 @@
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/**
* \page Page_AlternativeStacks Alternative USB AVR Stacks
*
* LUFA is not the only stack available for the USB AVRs, although it is perhaps the best (\see Page_WhyUseLUFA).
* In the interests of completeness and user choice, other known USB AVR stacks are listed here.
*
* - Atmel USB AVR Stack (<i>Atmel Inc.</i>) \n
* <b>Cost:</b> Free \n
* <b>License:</b> Atmel Limited License (see Atmel download for details) \n
* <b>Website:</b> http://atmel.com/dyn/products/app_notes.asp?family_id=607#USB \n
* <b>Description:</b> This is the official Atmel USB AVR stack, for their 8-bit USB AVR lineup. Each series of
* USB AVR is seperated into a seperate download stack, which is both AVR-GCC and IAR compatible.
*
* - Dr. Stefan Salewski's AT90USB1287 Stack (<i>Dr. Stefan Salewski</i>) \n
* <b>Cost:</b> Free \n
* <b>License:</b> GPL \n
* <b>Website:</b> http://www.ssalewski.de/AT90USB_firmware.html.en \n
* <b>Description:</b> This is a GPL'd library specifically designed for the AT90USB1287, by Dr. Stefan Salewski, a
* German Physicist. It compiles for AVR-GCC and can potentially be modified to work on other USB
* AVR models.
*
* - PJRC Teensy Stack (<i>Paul Stoffregen</i>) \n
* <b>Cost:</b> Free \n
* <b>License:</b> BSD \n
* <b>Website:</b> http://www.pjrc.com/teensy/usb_debug_only.html \n
* <b>Description:</b> Not so much a complete stack as a collection of USB enabled demos, this library is specifically
* designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR
* chips. These code samples shows the inner workings of the USB controller, without all the abstraction
* present in most other USB AVR stacks.
*/

1
LUFA/ManPages/FutureChanges.txt
Unescape Escape View File

@ -17,6 +17,7 @@
* -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error
* -# Add standardized descriptor names to class driver structures
* -# Correct mishandling of error cases in Mass Storage demos
* -# Add TPI programming support to the AVRISP project
* - Documentation/Support
* -# Remake AVRStudio project files
* -# Add detailed overviews of how each demo works

3
LUFA/ManPages/MainPage.txt
Unescape Escape View File

@ -33,8 +33,9 @@
* <b>Subsections:</b>
* - \subpage Page_WhyUseLUFA Why Use LUFA?
* - \subpage Page_LUFAvsAtmelStack How does LUFA compare to the Atmel USB AVR stack?
* - \subpage Page_AlternativeStacks Alternative USB AVR Stacks
* - \subpage Page_Licence Project licence
* - \subpage Page_Donating Donating to Support this Project
* - \subpage Page_Donating Donating to support this project
* - \subpage Page_LibraryApps Overview of included Demos, Bootloaders and Projects
*
* <small><i>Logo design by EDIGMA.COM</i></small>

64
Projects/HotmailNotifier/HotmailNotifier.c
Unescape Escape View File

@ -60,6 +60,39 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
},
};
/** Counter for the software PWM */
static volatile uint8_t SoftPWM_Count;
/** Duty cycle for the first software PWM channel */
static volatile uint8_t SoftPWM_Channel1_Duty;
/** Duty cycle for the second software PWM channel */
static volatile uint8_t SoftPWM_Channel2_Duty;
/** Duty cycle for the third software PWM channel */
static volatile uint8_t SoftPWM_Channel3_Duty;
/** Interrupt handler for managing the software PWM channels for the LEDs */
ISR(TIMER0_COMPA_vect, ISR_BLOCK)
{
uint8_t LEDMask = LEDS_ALL_LEDS;
if (++SoftPWM_Count == 0x1F)
SoftPWM_Count = 0;
if (SoftPWM_Count >= SoftPWM_Channel1_Duty)
LEDMask &= ~LEDS_LED1;
if (SoftPWM_Count >= SoftPWM_Channel2_Duty)
LEDMask &= ~LEDS_LED2;
if (SoftPWM_Count >= SoftPWM_Channel3_Duty)
LEDMask &= ~LEDS_LED3;
LEDs_SetAllLEDs(LEDMask);
}
/** Standard file stream for the CDC interface when set up, so that the virtual CDC COM port can be
* used like any regular character stream in the C APIs
*/
@ -77,11 +110,21 @@ int main(void)
for (;;)
{
/* Read next character - if a '1' turn on red led, if a '0' turn on green LED */
if (fgetc(&USBSerialStream) == '1')
LEDs_SetAllLEDs(LEDS_LED3);
else
LEDs_SetAllLEDs(LEDS_LED2);
/* Read in next LED colour command from the host */
uint8_t ColorUpdate = fgetc(&USBSerialStream);
/* Top 3 bits select the LED, bottom three control the brightness */
uint8_t Channel = (ColorUpdate & 0b11100000);
uint8_t Duty = (ColorUpdate & 0b00011111);
if (Channel & (1 << 5))
SoftPWM_Channel1_Duty = Duty;
if (Channel & (1 << 6))
SoftPWM_Channel2_Duty = Duty;
if (Channel & (1 << 7))
SoftPWM_Channel3_Duty = Duty;
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
USB_USBTask();
@ -101,15 +144,18 @@ void SetupHardware(void)
/* Hardware Initialization */
LEDs_Init();
USB_Init();
/* Timer Initialization */
OCR0A = 100;
TCCR0A = (1 << WGM01);
TCCR0B = (1 << CS00);
TIMSK0 = (1 << OCIE0A);
}
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
LEDs_SetAllLEDs(LEDS_ALL_LEDS);
if (!(CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface)))
LEDs_SetAllLEDs(LEDS_LED1 | LEDS_LED3);
CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
}
/** Event handler for the library USB Unhandled Control Request event. */

44
Projects/HotmailNotifier/WindowsApp/MailNotifier.cs
Unescape Escape View File

@ -12,18 +12,20 @@ namespace TestWinForms
public partial class MailNotifier : Form
{
private MessengerAPI.Messenger Messenger;
private RegistryKey AppRegKey;
private RegistryKey AppRegKey;
private const int LIGHT_MAX = 0x1F;
public MailNotifier()
{
InitializeComponent();
Messenger = new MessengerAPI.Messenger();
AppRegKey = Registry.CurrentUser.CreateSubKey("Software\\MailNotifier");
AppRegKey = Registry.CurrentUser.CreateSubKey("Software\\MailNotifier");
for (int i = 1; i < 99; i++)
cmbComPort.Items.Add("COM" + i.ToString());
cmbComPort.SelectedIndex = System.Convert.ToInt32(AppRegKey.GetValue("Port", "1")) - 1;
serSerialPort.PortName = cmbComPort.Text;
@ -34,7 +36,9 @@ namespace TestWinForms
private void MailNotifier_Load(object sender, EventArgs e)
{
Messenger.OnUnreadEmailChange += new MessengerAPI.DMessengerEvents_OnUnreadEmailChangeEventHandler(NewEmail);
NotifyLight(Messenger.get_UnreadEmailCount(MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX) > 0);
bool UnreadMail = (Messenger.get_UnreadEmailCount(MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX) > 0);
NotifyLight((!UnreadMail ? LIGHT_MAX : 0), (UnreadMail ? LIGHT_MAX : 0), 0);
Hide();
}
@ -48,18 +52,23 @@ namespace TestWinForms
private void NewEmail(MessengerAPI.MUAFOLDER folder, int amount, ref bool enableDefault)
{
if (folder == MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX)
NotifyLight(amount > 0);
{
bool UnreadMail = (Messenger.get_UnreadEmailCount(MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX) > 0);
NotifyLight((!UnreadMail ? LIGHT_MAX : 0), (UnreadMail ? LIGHT_MAX : 0), 0);
}
}
private void NotifyLight(bool ShowGreen)
private void NotifyLight(int Red, int Green, int Blue)
{
char[] buffer = new char[1];
buffer[0] = ShowGreen ? '0' : '1';
byte[] buffer = new byte[3];
buffer[0] = (byte)(0x80 | (Red & LIGHT_MAX));
buffer[1] = (byte)(0x40 | (Green & LIGHT_MAX));
buffer[2] = (byte)(0x20 | (Blue & LIGHT_MAX));
try
{
serSerialPort.Open();
serSerialPort.Write(buffer, 0, 1);
serSerialPort.Write(buffer, 0, buffer.Length);
serSerialPort.Close();
}
catch (Exception e)
@ -78,15 +87,20 @@ namespace TestWinForms
AppRegKey.SetValue("Port", cmbComPort.SelectedIndex + 1);
serSerialPort.PortName = cmbComPort.Text;
for (int i = 0; i < 5; i++)
for (int i = 1; i < 10; i++)
{
NotifyLight((LIGHT_MAX / i), (LIGHT_MAX / (i * 10)), 0);
System.Threading.Thread.Sleep(10);
}
for (int i = 10; i > 0; i--)
{
NotifyLight(true);
System.Threading.Thread.Sleep(20);
NotifyLight(false);
System.Threading.Thread.Sleep(20);
NotifyLight((LIGHT_MAX / i), (LIGHT_MAX / (i * 10)), 0);
System.Threading.Thread.Sleep(10);
}
NotifyLight(Messenger.get_UnreadEmailCount(MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX) > 0);
bool UnreadMail = (Messenger.get_UnreadEmailCount(MessengerAPI.MUAFOLDER.MUAFOLDER_INBOX) > 0);
NotifyLight((!UnreadMail ? LIGHT_MAX : 0), (UnreadMail ? LIGHT_MAX : 0), 0);
}
private void btnMinimize_Click(object sender, EventArgs e)

Write Preview
Loading…
Cancel
Save